There is no doubt that the washing machine is one of the important electrical appliances that is indispensable in any home, but over time you find that it is exposed to many malfunctions, and one of those malfunctions is that it stops drying, and this can be due to more than one reason, such as its imbalance or the failure to drain the water, which is due to damage or blockage. The following will explain the reasons for the washing machine drying malfunction.
Reasons for washing machine drying failure
Every now and then, washing machines experience a number of malfunctions, which can affect their ability to clean clothes. However, one of the most common causes is a failure to dry clothes, which is a sign that water isn't draining properly. The following are some of the reasons for washing machines drying problems:
1. The washing machine door does not close properly.
The door lock may malfunction or even become damaged due to improper closing, which can cause the washing machine cycles to stop working.
Its smart system sends a command to stop the rotation in case the door malfunctions.
So you should check the lock and all its parts. This will require you to refer to the washing machine manual and repair it or replace the damaged parts.
2. Overloading with clothes or blankets
Certain washing machines have automatic detectors that activate when you overload the machine. However, some models don't have these automatic detectors, so loading too much clothing can affect the machine's performance.
3. Using laundry soap or Ariel that is not suitable for it.
One of the reasons for a washing machine drying problem is using laundry soap that contains a lot of foam, or adding too much laundry soap, which causes the washing machine to contain foam.
This can cause the washing cycle to be interrupted, which can cause the washing machine to stop spinning, so it's best not to overfill the machine.
4. Not draining water
If the drain pump is faulty, the washing machine will stop draining the water from the drum. Therefore, you should check the pump and replace it with a new one.
It may also lead to a blockage in the drain hose or even the filter, obstructing the water flow.
So you need to disconnect the drain hose from the washing machine, and use a wire to insert it into the hose and get rid of dirt and such.
5. Engine belt damage
One of the reasons for a washing machine drying malfunction is damage. If the drive belt is broken or damaged, the washing machine will vibrate and make noise, but the drum won't spin. You should check the belt to determine the cause of the damage.
Disconnect the power and remove the back of the washing machine by referring to the washing machine manual.
6. Imbalance in the washing machine
An uneven washing machine causes vibrations and noise during wash cycles, which affects the performance of the wash cycles.
Therefore, the surface must be leveled using a spirit level, or you can place it on a parallel floor to prevent it from shaking.
7. Washing machine motor malfunction
One of the reasons for a washing machine drying malfunction is that the washing machine motor may have burned out or there is a malfunction in the motor. As a result, you only encounter a problem mid-cycle when you switch it to spin.
Although the washing machine may fill and vibrate without any problems, you should first unplug the machine and check for any damage or even burns to any of its parts.
8. Control system malfunction
Damage or even a malfunction in the control panel or the spin speed and power, especially those parts that control the washing machine's spin and drying system, can lead to drying problems.
Now that you know the cause of the washing machine's drying failure, you can use the washing machine's user manual to identify the fault, fix it, and replace the damaged part, if any.
If the washing machine does not spin, what should I do?
There are several reasons why your washing machine won't spin:
- The washing machine filter is clogged, and it must be cleaned well.
- Unbalanced loads in the washing machine: It is preferable not to fill the washing machine drum with clothes.
- Its inability to drain: Here you must check it and clean it if necessary.
- Washing machine door lock fault
- Engine belt problem
- There may be electrical or mechanical issues.
Why are clothes not drying?
If your clothes are not completely dry, the filter is clogged because it collects lint and fibers from the clothes.
Therefore, it must be cleaned after the drying cycle is complete. The lint filter is located on the edge of the washing machine door, so it must be cleaned here as well by pulling the lint filter upwards to remove it.
Why does the fully automatic washing machine not spin?
- You probably added a lot of clothes inside.
- Or the washing machine cover is not closed properly.
- Open in the electrical circuit
- Electric motor fault
Why is the LG automatic washing machine not drying?
When an automatic washing machine does not dry, there are several reasons for this, including:
- Unbalanced laundry: When you put bulky clothes, rugs or blankets in it, this results in it being unbalanced on one side.
- The washing machine is uneven: This results in not spinning or even drying.
- Using too many detergents or using the wrong powder
- Clogged washing machine pump filter
- Reasons for the washing machine not drying include damage to the belt or even its falling off.
- Exhaust pump malfunction
- Damage to the roller bearing housing
- There is a malfunction in the speed sensor.
- poor wiring
- Engine coil damage
- Also, the washing machine card is faulty.
The washing machine does not complete the program.
If your washing machine is not completing a program, this indicates a problem with the washing machine's motor circuit. This causes the drum to not spin, causing the washing machine to stop halfway through its program. Therefore, the electric motor must be checked and its components must be in good condition. If there is any damage, it must be replaced.
LG washing machine drying code
The symbol that indicates drying is dhe. In order to dry what is inside the washing machine, you must do the following:
- First, you have to press the power button to turn on the washing machine.
- Then select the time you need, and then press the dryness level button.
- Add the disinfectant or cleaner and the fragrance, and the amount depends on the amount of laundry.
- Press the start button, which is next to pause.
Meanings of automatic washing machine symbols
The meanings of the symbols vary from one type of washing machine to another, depending on the brand, whether it's Samsung, LG, Beko, or even Toshiba, etc. However, the symbols can be summarized as follows:
- Pre-wash symbol: This symbol indicates that the washing machine initially washes what is inside it.
- Options icon: This icon is responsible for adding options to the washing cycle.
- While Easy iron: This is the iron mark, and it reduces the spin cycle, so there are not many wrinkles in the garment.
- Delay end: It is responsible for setting the washing time.
- Spin: It means changing the speed of the cycle.
- Rinse: Determine the number of times to rinse the laundry.
Why does the washing machine stop rinsing?
If the washing machine is in the washing and rinsing phase and stops, this is due to the machine being overloaded with a load greater than its specified capacity, or greater than the capacity specified for the washing program you have selected.
As there are many washing programs that have a capacity completely different from the capacity of the washing machine.
That is, if the washing machine capacity is 8 kg, then in this program it will be 3.5 kg. You must take into consideration that there are some types of fabrics that require special care in order to avoid damage. To solve this problem, you must consult the user manual for your washing machine.
Finally, it's worth noting that there are many reasons for a washing machine drying malfunction, and it's likely that the process is easy and doesn't require a huge amount of money to repair or even the assistance of a specialized technician. Therefore, consider the aforementioned causes and implement the necessary steps if you encounter any problems with your washing machine.
English 
Arabic