The most common electric heater malfunctions

There are many problems that occur to the electric heater, which in turn affect its performance. When there is a water heater in the house, here you must take into account that you will be exposed to many malfunctions, but most of the time the problem is the electricity that reached the electric heater or a problem occurs in the electrical cable connected to the heater, as it is likely to be exposed to cutting or even melting in one of its parts, so in the following lines are the most common malfunctions of the electric heater.

The most common electric heater malfunctions

You may encounter any problem with your electric heater, which may lead to a reduction in its efficiency or even sudden malfunction. Because heater problems are numerous, we explain the most common electric heater malfunctions that people suffer from:

1. Weakness in hot water

A common problem with this water heater is a water tank that produces too little hot water.

You can usually solve this problem by raising the thermostat temperature, but be careful not to raise the temperature too high, to avoid burns.

2. Lack of hot water

If you don't get hot water when you turn on the hot water taps, this is one of the most common electric water heater malfunctions, and the problem is the pilot light that has gone out.

This is likely due to a faulty control valve or a problem with the heating element. All you need to do is replace it, and this task should be performed by a specialized maintenance technician.

3. Change the smell of the water

When there is a bad smell in hot water, this is sufficient evidence that the water is infected with bacteria in general.

You can detect and solve this problem by cleaning the internal water tank and then filling it with a solution of water and hydrogen peroxide or even hydrogen peroxide.

Leave the solution for two hours or more, then rinse it off with clean water. If the tank smells the same, it's best to call a technician.

4. Loud noise coming from the heater

This is considered one of the most common electric heater malfunctions. When the heater makes a loud noise when it is turned on, this means there is a problem with it. It is likely that the basin has sediment, or that the heating element is burning this sediment.

Here it becomes necessary to maintain and clean the heater tank from sediments.

5. Water leaking through the tank

When you find that the sink starts to leak, it is best to buy a new one, and be careful not to let water leak onto the electrical side to avoid a fire.

6. Excessive electricity consumption

This is one of the most common electric heater malfunctions. Many people face this problem, which results in a higher monthly bill due to several reasons.

This could include damage to the thermal insulation, or the heating element may not be suitable for the size of the electric heater, which results in it being in a state of continuous conduction. Alternatively, there could be a water leak inside the heater, all of which requires checking the leak in order to fix it.

The electric heater does not heat the water.

There are several reasons why water may not be heating up, including:

1. Thermostat malfunction
2. Heater unit fault
3. There may be a fault in the electrical wiring.
4. Control unit damage
5. There may be a problem with the control switch.

What causes a water heater to electrify?

1. There may be a short between the electrical wires.
2. Lack of insulation of wires from water pipes
3. Fault or fraying of the internal electrical wiring
4. Not isolating the heater
5. The heater does not reach the thermostat accurately.

The danger of electric heaters

The most important risks caused by electric heaters are the following:

1. Fires: When there is a fault in the heater's electrical circuit, and the temperature is high, this results in the melting of the switch that specializes in connecting the electric heater, and this results in a fire.
2. Electric shock: This occurs when the heater is installed incorrectly. This is due to the technician’s negligence or lack of sufficient skills, which results in electrical wires becoming tangled and causing a short circuit.
3. Explosion: When the temperature of the water starts to rise inside the heater, it causes the steam to condense, and this excess steam leads to an explosion.

electric heater thermostat

There are two types of electric heater thermostats:

Single thermostat: It is used in heaters that have one heater, i.e., one heating element.

As for the dual thermostat: It is found in the heater that contains two heating elements, one at the top and the other at the bottom.

The function of the thermostat is to open and close the electrical circuit, meaning it controls the water temperature, and it can be calibrated to the temperature you desire.

Instant electric water heater maintenance

There are two cases in which the heater does not heat up:

1. The heating lamp for your electric water heater may already be on but not heating.
2. The electric water heater's heating lamp was not on or even heating.

The smell of demons from the electric heater

This smell appears as a result of several points, including:

1. The safety valve malfunctions due to the salts and limescale deposited in the water heater.
2. There may also be water leakage due to corrosion and rust in the structure or weak welding points.
3. Do not turn off the thermostat when it reaches the desired temperature.

How do I know if the heater core is broken?

You can know that the heater core is damaged by the following:

1. The water comes out of the heater very little.
2. No hot water coming out of the electric heater
3. High electricity consumption
4. A break in one of the electrical circuit wires
5. If the heater is working and the water is cold
6. The water temperature may be low.
7. Melting in the electrical switch
8. The heater basically doesn't work.
9. Thermostat or heater damage

Electric heater components

It consists of:

1. Inner tank
2. cold water pipe
3. hot water pipe
4. There is the exoskeleton.
5. Also the insulating material
6. Water heating unit
7. thermostat
8. Heater accessories

Gas heater malfunctions

1. Black smoke accumulating around the stove
2. Dirty filter
3. The appearance of a red, yellow, or black flame
4. making a loud noise
5. Signs of heat damage, including the color of the wall or even an increase in temperature when the heater is turned on
6. weak heating
7. Unusual odor or eye irritation when the heater is on
8. Ignition problem

The reason for the heater burning out

When the heater's electrical circuit is faulty, as the temperature rises, the switch that connects the heater to electricity melts, causing the heater's heater to burn out.

Although gas heaters are widely used, electric heaters are the ideal choice for many individuals. However, they require regular maintenance because malfunctions begin to appear over time. To avoid these problems, we previously listed the most common electric heater malfunctions.