The 6 most common faults in fully automatic washing machines

A malfunctioning washing machine, one of the most important household appliances, can be a very annoying problem for a housewife, as it causes dirty clothes to accumulate. Fully automatic washing machine malfunctions are considered simple, and some can be easily repaired at home without the need for a repair technician. To learn about these malfunctions, continue reading the following lines.

Fully automatic washing machine malfunctions

We've compiled a list of the most common faults that can affect fully automatic washing machines.

1. The washing machine stops working.

It is considered one of the most common malfunctions mentioned by many, and there are many reasons that lead to this malfunction, including:

• No electricity reaching the washing machine: A problem with the power supply leads to a power outage, which in turn causes the washing machine to malfunction due to the lack of electricity. In this case, you should test the power outlet by placing it in another device to determine the location of the problem.
• Washing machine door not closing properly: This very simple reason may cause your washing machine to stop working. Therefore, you must ensure that the door is closed properly. Some washing machines are designed with a feature that prevents them from working if the door is not closed tightly.
• Motor failure: The motor is the heart of the washing machine, and any malfunction in it will affect its operation. The motor may overheat, causing it to shut down for a while until it cools down and then restarts. This can be worrisome if this happens repeatedly, and you should contact a maintenance technician.
• The washing machine cable is damaged.
• Wires are damaged
• There is a problem with the start button.
• There is a fault in the internal connections of the washing machine.
• Anti-noise unit damage
• Control panel damage

2. The washing machine is exposed to severe vibration.

A common malfunction that everyone experiences while their washing machine is performing its function and washing clothes. You will find it vibrating violently and may move from its place due to this vibration, in addition to the loud noise it makes. All of this is usually caused by:

• Loading clothes that exceed the washing machine's capacity.
• The washing machine may not be level on the floor, as it may be tilted or unstable.
• There is obvious wear on one of the washing machine legs.
• The metal poison in the clothes is what causes this sound while spinning.
• Unbalanced load inside the washing machine.
• The ejection pump's seal contains coins.

3. Not draining water

This malfunction may result from at least one of the following reasons:

• A blockage in the drain hose. This blockage could be caused by a piece of clothing, socks, tissue paper, or anything else.
• A failure in the drain cycle occurs. If this happens, you will see an error code, which may vary from one brand to another.
• Drain pump failure.
• Overloading clothes in the washing machine.
• Excessive use of detergents causes the formation of thick foam that prevents the washing machine from draining.

4. The washing machine does not draw water.

It often happens that the washing machine starts working but stops quickly and does not draw water. This is due to:

• No water. This could be due to a water outage or a closed water valve in the washing machine.
• A kink, blockage, or bend in the hose connecting the water supply to the washing machine.
• The sediment filter at the end of the water hoses, whether from the water supply or the washing machine, becomes clogged. It can be easily removed and cleaned if there is any sediment on it.
• There is a problem with the water level sensor.
• The washing machine's electronic card is damaged.
• The terminals are coming out of their place on the water inlet valve.
• The terminals are coming out of their designated places inside the electronic card.

5. Rotation in one direction

The washing machine is designed with a two-way rotation feature, which helps clean clothes well. However, if you find it only rotating in one direction, this means there is a malfunction, and the cause of this malfunction is:

• Loading too many clothes for the washing machine.
• Motor failure: This motor is responsible for the rotation and vibration of the drum. These movements are carried out by the transmission. If the washing machine rotates in one direction, this means there is a problem with this transmission.
• The connecting piece between the transmission and the motor is damaged.

6. The washing machine drum falls.

The washing machine drum is the place where clothes are placed, and dropping them causes severe malfunction in the washing machine, which occurs as a result of the following:

• overload of clothes
• Running the washing machine several times a day
• The washing machine does not complete the spin cycle.

What are the reasons for the washing machine not receiving electricity?

• Both wires and connections are damaged.
• The power plug is faulty.
• ignition key damaged
• The washing machine cable is damaged.
• One of the washing machine's terminals is loose.

Why does the automatic washing machine make a loud noise during the spin cycle?

• Unbalanced washing machine load
• The washing machine is not level on the floor.
• Something is stuck under the washing machine fan.
• Weak or malfunctioning washing machine assistants
• The washing machine is damaged.
• The washing machine does not operate properly the first time.
• The amount of clothes is large
• Pomegranate defect

Fault codes for fully automatic washing machines?

• The code E1: Indicates a water drainage failure, and the code appears after more than 2 minutes of spinning.
• The code E2: Symbol for the washing machine door not closing tightly.
• Codes E3, E32, E33: It indicates that the clothes are not distributed correctly inside the washing machine. Therefore, it is always recommended to distribute the clothes evenly and not focus on one side over the other.
• Code E4: It appears when there is a malfunction in the water supply to the washing machine, which is often due to a water outage. When this code appears, the washing machine must be disconnected from the power and restarted when the water returns.

The fully automatic washing machine does not complete the program.

As a result of one of the following reasons:

• The electricity is weak
• The heating element circuit is damaged.
• There is a problem with the water expulsion process.
• The washing machine timer is broken.

Reasons why the top-loading washing machine drum does not spin

• faulty wiring
• Washing machine drum belt falling off
• The engine drum is damaged.
• Capacitor damage
• Thermal break failure

Automatic washing machine assistants price

Washing machine assistants may be damaged and need to be replaced. Hence the question of their price. This price is determined based on:

• Quality
• Brand
• washing machine capacity

The sound of friction in the washing machine is fully automatic.

This sound comes from:

• Clothes containing a solid object
• There is a solid object stuck between the washing machine drum and the door gasket.
• Filter needs cleaning

If you've reached this point, you'll have completed your knowledge of fully automatic washing machine malfunctions, which will greatly help you overcome them and avoid their consequences.