vacuum cleaner Vacuum cleaners are one of the most important household appliances that help us clean our homes and get rid of dust and waste. Therefore, they hold a significant place in our daily lives and are indispensable. However, sometimes vacuum cleaners experience problems that limit their capabilities, leading to much debate about this issue.
One of the most popular topics these days is what are the reasons why the vacuum cleaner does not suck and what are the treatment methods. This is the topic of our article today. We will know all the reasons why the vacuum cleaner does not suck and we will talk about each reason in detail and we will know the methods of treating this problem and we will also know some information and precise details about our topic. I hope you, dear visitor, will benefit greatly and enjoy reading this very important article.
Reasons why the vacuum cleaner does not suck and how to fix it
There are a wide range of reasons why a vacuum cleaner may not be suctioning properly. Now we will learn about these reasons, which appear as follows.
1. Dirt buildup on the brush
As a result of repeated use of the vacuum cleaner, we notice that its suction capacity has decreased. This happens because the floor brush has accumulated dirt, which clogs the brush and makes it difficult to suction the dust.
2. Weak power source
Low voltage is one of the main factors in the vacuum's poor suction power, as it prevents the motor from receiving the power it needs to operate.
The vacuum cleaner needs electricity (220 volts). If the electricity voltage is low, the vacuum cleaner will not work properly and may lose its ability to work completely. This is due to the motor not receiving the power required for operation.
3. Hose blockage
The hose is the connection between the machine and the brush. It can become clogged with a large piece of debris stuck inside. This clogs the hose and renders the machine useless, as the suction field is zero because the field is closed in the way of everything being sucked up.
Consequently, the suction power decreases to a minimum and may even disappear. The vacuum motor then attempts to operate at maximum power and continues to operate until the suction power reaches its maximum. This results in the motor overheating as it continues to operate at the highest level of dust suction.
4. Vacuum fan malfunction
The fan is responsible for the air suction movement that draws out dust. If something obstructs its movement, it will not operate efficiently. Therefore, you should inspect it and remove anything that prevents the vacuum from working efficiently.
Vacuum cleaner blockage treatment
It is as follows:
1. Pay attention to engine power.
Machines vary in their operating power, so you should know the motor's power rating before purchasing a vacuum cleaner. You should also ask about the maximum amount of time the machine can operate without needing to rest.
2. Air leakage
You should ensure that the vacuum hose is free of any problems and has no cracks or holes, so as not to affect the suction power. If there are cracks or holes in the hose, it is best to replace it immediately so that the vacuum cleaner and its suction power are strong.
3. Empty the dust bag.
You should empty the vacuum bag immediately after use. Make sure there is nothing left in it and do not wait for the bag to be full before emptying it.
Why does the vacuum cleaner overheat?
A full dust bag or a clogged hose are two of the most important factors causing a vacuum cleaner to overheat, due to the motor being overloaded.
Vacuum cleaner suction power
The unit of measurement is watts (for corded vacuums), as the suction power of the vacuum ranges between 1200-3000 watts.
What causes dust to come out of the vacuum cleaner?
Dust coming out of a vacuum cleaner is an important sign that it's not vacuuming properly. If your vacuum is whistling or emitting dust, the dust tank or bag may be full.
How does a vacuum cleaner work?
The vacuum cleaner works by using a suction fan where there is a partial vacuum in the device, and outside air is pushed into the vacuum at a rapid pace to fill the vacuum and with it the dirt, and the vacuum bag traps the dirt from the rushing air which is then released cleanly to the outside.
How to clean a vacuum cleaner filter?
- Unscrew the vacuum cleaner filter.
- Place the filter in the pot.
- Put the washing powder, dishwashing liquid, baking soda and boiling water on top of it.
- We leave the mixture to react with the filter for 30 minutes.
- Wash the filter well from all sides using a sponge.
- Then we rinse the filter using lukewarm water.
- Then we leave the filter to dry completely.
Finally, we've reached the end of the article, in which I talked about the reasons why the vacuum cleaner doesn't suck and the treatment methods. We also talked about the reason for the high temperature of the vacuum cleaner, the vacuum cleaner's suction power, the reason for dust coming out of the vacuum cleaner, how the vacuum cleaner works, and how to clean the vacuum cleaner filter.
English 
Arabic