House cleaning has become an integral part of everyone's life, so it's not unusual to use tools or even devices to clean carpets or even surfaces. One of those devices was the vacuum cleaner.
It has become an important part of every housewife's life, but like any electrical device, it will break down over time, and this is an indication that the vacuum cleaner is faulty. Therefore, the following are the reasons for the high temperature of the vacuum cleaner.
Reasons for the vacuum cleaner to overheat
The idea behind vacuum cleaners of all types is that the motor rotates and drives the blades or drives the fan, which is designed in a specific way, in order to clean surfaces, even carpets and the like. However, when the temperature of the vacuum cleaner rises, this is due to several reasons. Therefore, the following are the reasons for the rise in the temperature of the vacuum cleaner:
1. Blockage in the hose
If the vacuum cleaner hose is clogged, it will require a lot of torque, which will put an extra load on the motor. This can lead to an increase in the motor temperature, which in turn can lead to an increase in the vacuum cleaner's temperature.
Here you need to remove the plug and you should also notice that the suction power is less than it actually is, and this is due to a blockage in the hose.
Here, you must clean the vacuum hose properly. Remember that you should not use a sharp tool to avoid puncturing the hose. Therefore, you must follow the company's instructions, as indicated in the user manual included with the product.
2. Blockage in the dust filter
One of the reasons for the vacuum cleaner to overheat is that it was initially equipped with a dust filter or filters depending on the design of the vacuum cleaner.
The purpose of these filters is to clean the air from dust and dirt on surfaces.
It's worth noting that each filter consists of small holes, which allows it to trap any particles. Furthermore, the accumulation of dirt will obstruct air movement, requiring a high-voltage motor to perform the suction process. Therefore, the suction process is required to perform heat exchange.
To get rid of this fault, you must clean or replace the filters.
3. The dust and dirt collection bag is full.
This bag collects the dust that the vacuum cleaner sucks up from the floor.
Here, you should not wait for the bag to fill up. It is better to empty the bag periodically. This is because when the bag is full, the air will not be able to circulate, which results in the engine having to work harder.
This causes the temperature to rise and results in the release of a musty odor. Thus, we have identified one of the reasons for the high temperature of the vacuum cleaner.
4. Engine damage
The vacuum cleaner motor now relies on wire coils. When electricity reaches it, it creates a magnetic field, preventing the generation of kinetic energy that is transferred to the vacuum cleaner's fan, which sucks up the dust.
However, it is possible that these coils may be damaged or burned, which will result in the engine not being able to rotate, and when electricity reaches it, this will lead to a rise in temperature and the spread of a musty smell from it.
The motor may need to have its carbon brushes replaced, as well as the brushes or even the carburetor, which are components of the vacuum cleaner motor.
Damage to the axle bearings can also cause the vacuum motor to overheat, which can cause the vacuum cleaner to overheat. This is one of the reasons why the vacuum cleaner overheats.
How do I know if the vacuum motor is about to burn out?
Vacuum cleaner motor malfunction is one of the most common problems that occur when the vacuum is used incorrectly. There are several reasons why you can tell if the vacuum is about to catch fire:
- There is a problem with the electricity
- Misuse of the vacuum cleaner
- Electronic control panel fire
- When you run the vacuum for too long
- The vacuum's thermal fuse is faulty.
- fever
Why does the vacuum cleaner disconnect?
- Due to a fault in the electrical connection
- Or a fault in the electronic board
- One of the reasons is the presence of damage that may have resulted from the increase in the electrical party.
What causes dust to come out of the vacuum cleaner?
The bag that is responsible for collecting dust may have become punctured or damaged, causing dust to escape.
Why is the vacuum cleaner not sucking?
The bag or dust tank may need to be emptied, or you may need to clean the filter.
The smell of demons from the broom
When the air intake pipe for the brush attachments becomes clogged or the roller attachment is likely to become clogged due to dirt buildup.
If you use a vacuum cleaner and most of its parts are not well-known, this will lead to a musty smell spreading from it.
The vacuum cleaner is muffled
- A change in air pressure, which is produced by the fan and the vacuum suction process.
- engine sound
- Vibration in the vacuum body
- There is a problem with the vacuum cleaner.
- Or there may be a blockage in the air filter.
- Blockage in one of the vacuum cleaner parts
- Broken internal fan of the vacuum cleaner
Samsung vacuum cleaner malfunctions
- Weak suction: Here you can clean it by unscrewing the vacuum to reach the filter, removing it, then washing it well with water and leaving it to dry, so that it can do its job properly.
- The vacuum cleaner makes a loud noise: This can be caused by more than one thing: a foreign object has damaged the brush, it is stuck in the extension tube or flexible hose, the dust bag is full, etc.
- Vacuum cleaner overheating
- The drive belt is likely broken. Unscrew all the screws that hold it to the plastic cover plate, pull one end of the belt off the pulley, and then press the belt.
- Vacuum brush not rotating
- Burning smell coming from the vacuum cleaner
Vacuum cleaner stores in Saudi Arabia
We will learn about the most important vacuum cleaner shops in Saudi Arabia as follows:
1. Al-Khunaizan Electrical Appliances Company Store
- Address: Saad bin Abi Waqas, Al Naseem Al Gharbi, Riyadh 11564, Saudi Arabia
- Tel: +966 92002 7772
2. Al-Munae' store
- Address: Dammam Branch Road, Al Munsiyah, Kingdom of Saudi Arabia
- Tel: +966 92000 8171
3. Al-Burkan Store for Maintenance and Sales of Spare Parts for Home and Electrical Appliances
- Address: 8654 Osama Bin Zaid Street, Al Naseem Al Gharbi, Riyadh 14233, Saudi Arabia
- Tel: +966 55900 1096
Thus, we have identified the most common causes of vacuum cleaner overheating. When you encounter any of these causes, you must address them, as previously mentioned.
English 
Arabic