How to clean an automatic washing machine

If your washing machine's cleaning efficiency has deteriorated and your clothes smell bad after a wash cycle, this indicates that your washing machine needs cleaning. This is because the buildup of sediment creates a breeding ground for bacteria that cause unpleasant odors. There are various safe ways to clean your washing machine without negatively affecting it. In this article, we will provide several ways to clean your washing machine and eliminate odors.

How to clean an automatic washing machine

You can easily clean the parts of your automatic washing machine and achieve high operating efficiency by following these steps:

1. Detergent dispenser drawer

When cleaning the detergent dispenser drawer, turn off the washing machine, then pull the drawer out completely. Then, soak the drawer in a bowl of hot water. You can add dish soap or vinegar to the water for optimal cleaning results.
While the drawer is soaking, clean the inside of the detergent dispenser drawer compartment with a cloth or sponge using water and vinegar to remove dust. If there is any dust or dirt stuck in the cracks, use a toothbrush to remove it.
Now clean the drawer that has been soaked in water and remove any soap residue and mold using a sponge. After making sure the drawer is clean, wash it under warm water and leave it to dry completely, then put it back in the washing machine.

2. Drain pump filter

Before cleaning your washing machine filter, check the filter and make sure it has a self-cleaning filter located under the agitator. If it is of this type, note that it requires cleaning less time than a standard filter.

First, make sure that the electricity is off, then remove the cover located under the washing machine. If you cannot find the filter location in the washing machine, look at the user manual.
Then, turn the outer cover and remove the filter. If you have difficulty removing the filter, move it several times to remove any soap residue and sediment. After that, you can remove it easily.
After removing the filter, you will notice a liquid layer on it. You can use paper towels to clean it and remove the lint and soap that has accumulated on the outer part.
After that, the strainer is removed and soaked in hot water for 15 minutes to remove any dirt stuck inside.
Clean the inside of the chamber from soap residue and dirt with a cotton cloth or a clean sponge.
After ensuring that the filter is clean, replace it, close it tightly, and then close the outer cover. Make sure that the filter is securely in place.

3. Washing machine tub

When cleaning the washing machine tub, disconnect the power from the washing machine and empty it. Clean it using white vinegar and a piece of sponge.
It is recommended not to repeat this step too often, as the vinegar may cause corrosion of the rubber surrounding the door.

4. The rubber part surrounding the door

The rubber part surrounding the washing machine opening is one of the main causes of unwanted unpleasant odors.
It is the most vulnerable place to accumulate mold and dirt because it is exposed to a high percentage of moisture.
One of the most effective methods for cleaning the rubber part is baking soda.
Run a wash cycle without clothes at 90°C.
After the washing machine stops, use a cloth and detergent to remove any dirt stuck inside the rubber part that the washing cycle was unable to clean.

5. Front-loading washing machine exterior

You can use many products to clean the outside of the automatic washing machine.
You can use an antibacterial or white vinegar and then use a clean cloth to eliminate germs and dust.

How to clean the automatic washing machine from odors

The washing machine is one of the most important household appliances that must be cared for and cleaned regularly, eliminating unpleasant odors and harmful substances to keep it clean and free of unwanted odors. Therefore, we will learn about the best cleaning methods used, which are as follows:

the components

A cup of lemon salt.
Half a cup of baking soda.

Preparation method

Prepare a cleaning mixture of lemon salt and baking soda, then place it in the detergent drawer. Set the washing machine to a 90-degree wash cycle, press Start, and let it complete a full cleaning cycle. You can repeat this process every month.

How to clean an automatic washing machine with vinegar

Vinegar is one of the most commonly used cleaning agents for washing machines, as it has effective properties for eliminating dirt and germs. Baking soda also has the ability to clean metals, so they can be used together to achieve satisfactory and wonderful results. This can be done through the following steps:

the components

White vinegar.
The soda fountain.

Preparation method

First, mix baking soda with water and stir well until the ingredients are combined, then add the mixture to the detergent drawer.
Then, put some vinegar in the washing machine tub and turn it on at a high temperature, perhaps 90 degrees Celsius. After the washing cycle is complete, clean the washing machine door using a cloth dampened with soap and water.
You can also put vinegar in the place designated for adding fragrances, and baking soda in the place designated for adding detergent, and run a normal wash cycle but without clothes.

How to clean an automatic washing machine with citric acid

If your washing machine is running low and emitting a foul odor, you can try one of the most effective ways to clean it: citric acid. Citric acid has powerful properties that remove dirt and germs stuck in the washing machine and eliminate any lingering odor. It can also eliminate grease buildup over the long term.

Citric acid is known for its effective cleaning properties and leaves a fresh scent after cleaning. You can try this method by following these steps:

Place a small amount of citric acid in the detergent drawer and run the washing machine on a long wash cycle at a high temperature. You can also add a small amount of baking soda for amazing results.

How do you run a vinegar cycle in an automatic washing machine?

Empty the washing machine of clothes so that it is completely empty. If the washing machine has a wash cycle that ended recently, let it rest for at least two hours. Then, add vinegar to the washing machine, connect the power, and turn it on.

What do we put to clean the automatic washing machine?

Mix one cup of baking soda with one cup of bleach and place the mixture in the detergent drawer. Then, add one cup of baking soda to the rubber gasket on the washing machine door and run the machine on a high-temperature wash cycle. After the machine stops, clean the gasket with a sponge dampened with a solution of soap and water.

At the end of the article we talked about how to clean automatic washing machineWe also provide several different methods that will help you clean your washing machine easily and get a clean washing machine without dirt or germs that cause unpleasant odors.