Top 4 Causes of a Clacking Noise When the Washing Machine Spins

All washing machines make loud noises when they are running. This noise is a degree of noise, but the sounds vary according to the condition of the washing machine and according to the time of the sound. There are also normal sounds that do not cause harm or negatively affect the washing machine, and other sounds that require the help of a washing machine maintenance technician to find out what is wrong with them. The sounds that resemble noise are not a simple, quiet hum in the washing cycles, but rather very loud and more annoying sounds. These sounds have several causes that must be identified to treat them before they escalate. We have often heard strange and annoying sounds emanating from inside washing machines.

Clacking noise when washing machine spins

The annoying noises emitted by washing machines cause damage to the motor or a weakness in the washing and cleaning process, and the washing machine becomes in an insufficient state of washing and cleaning, in several forms and situations as follows:

If you hear squeaking, banging, clanging, rattling, vibration, rubbing, or roaring sounds, these are all common noises that do not harm your washing machine.
Also, all washing machines make these sounds when operating.

However, if other sounds appear, you must seek the help of the best technicians, identify the causes that lead to this, and quickly treat them with the help of the best specialists in these matters.

Automatic washing machines and clicking noise

The idea behind automatic washing machines is to spin the clothes in a circular motion, while containing the necessary detergent to clean and sterilize them.
After the clothes rub against each other, the washing machine performs its task of cleaning the laundry. As the laundry rubs against each other and the washing machine fan makes sounds, a quiet clicking sound is heard as a result of the friction.
Automatic washing machines are among the best machines designed for washing, as they produce cleanliness, sterilization, and disinfection of clothes of the same quality as hand washing, but with superior quality without the minimal effort.

Causes of a clicking sound when the washing machine spins

There are many reasons that lead to the emission of a clicking sound during the rotation of the washing machine fan, and these reasons can be identified in several points as follows:

1. IA solid object is stuck between the washing machine drum and the door gasket.

The washing machine door gasket's job is to fill the gaps between the door and the washing drum. This is often caused by one of the following factors:

A piece of light clothing, a cord, or a coin may become lodged between these parts.
When the washing machine is washing and spinning, it starts to make a quiet clicking sound, but when it starts to spin the clothes, the sound gets louder.
The sound starts to get louder and more annoying to others, which is like holding a piece of metal and scratching it against the wall.

This problem can be fixed by consulting a specialized technician who will remove the solid object stuck in the door seal and ensure that nothing else is stuck.

2. There is a solid object in the washing machine

The solid objects that get stuck in the washing machine during spinning are several small objects, which may be metallic, and among them are the following:

Pins, hairpins, buttons, and sweets can get caught between clothes, obstructing the washing machine's rotation. As the washing machine spins, metal objects rub against the drum, causing a loud clicking sound.
One of the best and most important factors in maintaining your washing machine is carefully inspecting your clothes before washing.
A clicking sound may occur when clothes with metal parts, zippers, or buttons rub against the drum, but this sound is normal and does not pose a risk to the quality of the washing machine.
If you hear a loud crackling sound while washing bed sheets or a small comforter, there should be no sounds in this case.

3. ESolid object stuck between the two rings

The washing machine has two drums, one for storing the laundry and the other, the outer drum, which contains the rotating drum inside. This drum is called the fixed drum, and it is the drum that contains the heater inside it.
It is located in a fixed position with the washing machine body, and water flows into it. A metal object, such as a pin or a coin, gets stuck in the washing machine. When the washing machine rotates, the solid object begins to rub against the washing machine drum.
The solid object must be removed from the area and from the clothes to eliminate the sounds. It is easier to remove it if it is stuck in one of the holes in the moving drum.
If it gets stuck between the two pots, it is necessary to disassemble the pot and remove it with the help of a specialized technician.

4. Clogged washing machine filter

The filter is the part responsible for drawing water from the tub and expelling it outside. It is located in the expulsion pump. The filter works at several successive points as follows:

The filter usually has an electric motor with a fan attached to it, and when the motor starts rotating, the fan spins.
As the fan rotates, it draws water from the drum and pushes it into the discharge hose.
The filter is installed to protect the pump impeller, so that the water from the tank goes to the filter first before the drain pump.
If there is a water obstruction, this prevents water from passing to the drain pump.
Metal objects and obstructions in the filter increase over time, making the clicking noise louder when rotating.
The sound is eliminated when the filter is removed and cleaned.

The washing machine filter is one of the washing machine components that is prone to clogging, due to not cleaning it regularly after each wash.

Tips to get rid of the clicking sound when the washing machine is spinning

A washing machine repair technician provides several tips and steps to maintain the washing machine and prevent a clicking sound when it spins, after following the tips step by step. These tips include the following:

Check and remove the transport bolts: Ensure that all the transport bolts on the back of the appliance have been removed. If they are still present, remove them immediately and replace them with the replacement bolts provided with the washing machine.
Transportation bolts and screws must be kept in a safe place for use when transporting the washing machine.
Remove the hose from the holders.
Remove the four screws on the washing machine.
Unlock the four locks.
Install the four covers, and then press these covers.

Therefore, the clicking sound must stop and the washing machine must return to its normal state again before the washing machine is exposed to obstacles that cause the sounds.

This concludes the topic of the clicking sound when the washing machine spins, which is an extremely important topic that many housewives need to know when faced with one of these situations.

You may also be interested in: Top 4 Reasons for Washing Machine Dryer Malfunction