Freezer hole repair

For many people, the freezer is a wonderful appliance, as it has the ability to preserve leftovers for as long as possible, and it is also one of the appliances that no home can do without at that time. However, recently, many people have begun to face the problem of a hole in the freezer, and this is why research has increased on how to fix a hole in the freezer, and this is what is being learned.

Freezer hole repair

If there is a hole in the freezer, it is likely that the freezer is made of aluminum and the hole was caused by misuse of sharp tools. In this case, you must disconnect the power to prevent water from entering the hole. Here is how to repair a hole in the freezer:

1. The first way to fix a freezer hole

To repair a freezer hole, you can use an epoxy resin weld, which consists of two tubes: the first contains the resin, while the second contains the hardener.

Then, remove any traces of oils from the leak area by wiping them with a cotton ball dipped in talcum powder (a solvent), and using a fine sandpaper cloth, clean around the hole.

On a clean surface, place two equal amounts of solder tubes so that they blend together, then place an appropriate amount of the mixture to fill the hole. If you want the solder to dry, shine a light on it. This helps it dry very quickly, and thus you can repair the freezer hole.

2. The second method for fixing a freezer hole

You should use a metal file to file the edges of the hole in the freezer box so that it is smooth, then clean the hole area well, inside and out, using rubbing alcohol and paper towels.

Measure the dimensions of the hole from the inside and outside, then cut a square aluminum sheet. It is best to make the sheet larger to ensure it covers the hole well.

Apply a suitable amount of waterproofing material to all edges of the aluminum sheet, place the sheet on the spot, press it firmly for a few seconds, and leave it to dry for 24 hours.

After the time has elapsed, you should cut off the excess sheet with a saw, clean the hole again with rubbing alcohol, and paint the area with a freezer-colored finish or similar.

What happens if there is a hole in the freezer?

If a hole occurs in the freezer, this will result in the following:

• Evaporator cooling failure
• The condenser temperature also decreases.
• Compressor amperage drop
• Refrigerant leakage from the cooling circuit

Why is the refrigerator getting cold and the freezer not freezing?

The washing machine may be located next to the stove, in direct sunlight, or there may not be enough space behind the refrigerator. This results in a weak cooling circuit, which causes the refrigerator to cool down but the freezer to fail to freeze.

Why is the freezer not freezing?

• There may be dirt in the condenser coils, which reduces the freezing rate.
• One of the reasons is that the evaporator fan motor pulls air up to the evaporator coils and then circulates it throughout the freezer.
• There is a thermostat controlling the temperature, if it is not working then the freezer will not freeze
• If only one shelf is frozen, there is a leak in the closed system.
• There is a problem with the defrost system.
• condenser fan motor

Steam coming out of the freezer

In this case, the low-pressure area inside the freezer pulls hot air from the freezer compartment into the interior, causing steam to rise and escape, depending on the temperature.

This causes the thermostat to turn on the cooling unit to reduce the temperature inside the freezer to the temperature set on the thermostat.

Signs of Freon gas leakage from the refrigerator

It was represented in:

The leak is a gas that passes through the back pipes, where it becomes responsible for the entire cooling process. Signs of a Freon gas leak from the refrigerator include the following:

• The refrigerator is not cooling: This is evident from the food that has not reached the required degree of coldness.
• Presence of oil at the leak site
• One of the signs is that the refrigerator is making a leaking sound.
• Do not disconnect the refrigerator motor.
• A strange smell appears near the refrigerator

Internal leak in the refrigerator

There are many factors that can cause leaks. Some can be avoided, while others require maintenance because they are related to the refrigerator's expected lifespan. The following are some of the causes of leaks:

• There is a hole in the freezer
• Some pipes are specially salted made of aluminum.
• The back pipes of the refrigerator are broken or have holes in them.
• Opening the refrigerator door too often and not closing it well
• Putting hot foods outside the refrigerator
• The refrigerator is located in a place with high temperature or high humidity.

How can a freon leak be detected?

• Visual inspection of the refrigeration unit: This is one of the methods used to detect a Freon leak. The visual inspection involves examining the refrigeration unit located at the back of the refrigerator.
• Using specialized devices to detect leaks: There are devices that detect the halogen gas group, which is a group of gases that includes many types of Freon. These devices work by recording the difference in gas pressure or by turning the fluorescent yellow.
• Soap bubble: Clean the back of the refrigerator and then mix an appropriate amount of water with dish detergent. Place the mixture in a water spray bottle and spray it on the pipes behind the refrigerator. If small bubbles appear, this indicates a leak in that area.

The damage caused by Freon gas leaking from the refrigerator

The damages were as follows:

• The individual feels unable to move his limbs.
• He will have difficulty pronouncing words and feeling dizzy.
• constant feeling of sleepiness
• Freon gas is now being transferred to people through ingestion, and this occurs through water contamination.
• Stomach ache and digestive system fatigue in a big way
• Feeling dizzy all the time and unable to move
• Digestive problems along with severe diarrhea

Signs of Freon deficiency in the deep freezer

• Chemical smell
• One of the signs of low Freon is the sound of venting.
• Noticeably poor cooling
• The refrigerator serpentine becomes cold, or as it is called the condenser or the black mesh that is located in the back of the refrigerator
• Refrigerator motor makes constant noise

It's worth noting that you can identify a hole in your freezer by the disruption of obvious functions in the refrigerator, whether the food temperature is warm, not freezing, or the like. Therefore, you should follow one of the freezer hole repair methods explained previously.