The washing machine is one of the vital appliances in the home, as it facilitates the process of washing clothes and furnishings, due to the difficulty of washing them by hand. It contributes to removing stains from clothes. There are many types of washing machines available, such as regular, automatic, and super-automatic washing machines, but some problems can occur that prevent them from working, the most common of which is the washing machine drum not rotating. As a result of frequent use, the chances of it stopping suddenly are greater. Therefore, we will provide a variety of tips for stopping the washing machine drum from rotating.
Reasons why the top-loading washing machine drum does not spin
There are several reasons why a fully automatic washing machine drum might not spin. You should be aware of these reasons to find a solution to the problem. Follow the steps below:
1. The operating switch of the fully automatic washing machine is damaged.
A faulty switch can cause the washing machine to not spin and requires repair, as follows:
The electrical current of the switch must be measured once at the point of current entry and again at the point of current exit.
If you find that the pointer moves at both ends of the entry point and stops at both ends of the exit point, the switch must be replaced quickly.
2. Neglecting to close the washing machine door or the door switch is damaged.
Failure to close the door properly causes the washing machine to stop spinning. The problem can be solved as follows:
Close the door of the fully automatic washing machine properly. If the washing machine still doesn't work after ensuring the door is closed, have a maintenance technician check the door switch and replace any damaged parts. This step requires precision and maintenance without a specialist will be difficult.
3. Neglecting to close the soap drawer properly
It's important to keep the detergent drawer clean because it's one of the areas that many people neglect to keep clean, which can lead to automatic machine shutdowns. Therefore, some models require a vinegar cycle to remove soap residue. The method for use is as follows:
Put half a cup of vinegar in the soap drawer and run the washing machine on program D until finished.
Be sure to check the instructions included with your washing machine for proper handling and to avoid any problems.
4. The fully automatic washing machine does not receive electricity.
Check the power supply and make sure it is working properly, as this could be one of the reasons why the washing machine drum stops spinning.
Troubleshooting method:
You must ensure that the electrical current is reaching the fully automatic washing machine by performing a quick test using a voltmeter or a 220-volt bulb, by following these steps:
Connect the voltmeter to the power source or outlet. If the indicator doesn't move or the bulb doesn't move at all, the outlet is faulty and your fully automatic washer should be switched to a second power source.
- If the indicator moves or the test light comes on, remove the top cover of the washing machine and test both ends of the inlet rose.
If the indicator does not move, this means that the plug is faulty or one end of the cable is damaged or cut, so it must be replaced and the washing machine must be operated again.
Fully automatic washing machine malfunctions
Includes:
1. The washing machine vibrates violently.
This is common and is usually accompanied by a loud noise or vibration in the washing machine. It can occur for a variety of reasons, including: The washing machine is overloaded or the washing machine is uneven, such as if the base is tilted or unstable.
2. The washing machine rotates in one direction.
Washing machines are designed to spin in both directions, which helps clean clothes. If you find that your washing machine doesn't spin in both directions, there may be a malfunction with the machine or a simple problem. One of the most important reasons for a washing machine not spinning in both directions is overloading the machine. Loading more clothes than the permitted load will cause it to spin incorrectly.
Washing Machine Motor Problem: The main motor in the washing machine is responsible for the rotation and vibration of the drum. This is accomplished by the transmission. Therefore, if the washing machine is rotating in one direction, the cause may be a damaged transmission, which requires replacement. The problem may also be with the motor itself, and it should be taken to a technician to determine the possibility of repairing or replacing it with a new one. Sometimes, the part that connects the transmission to the motor may fail and only needs to be replaced without having to replace the entire motor.
3. The fully automatic washing machine drum falls.
One of the most common causes of fully automatic washing machine malfunctions is misuse, which is the main cause of most washing machine malfunctions. A washing machine drum falling over is a common malfunction that can cost you a significant amount of money to repair. A fully automatic washing machine drum falling over is caused by:
Overloading: When you repeatedly load heavy clothes into the washing machine, this causes the part that holds the washing machine support (the support is responsible for stabilizing the washing machine drum) to weaken. If this happens repeatedly, this part can break and cause the drum to fall.
Running the washing machine several times a day: Housewives often run the washing machine more than once a day, especially when there are children in the house. However, it is recommended that you leave at least two hours between each wash cycle. Repeatedly running the washing machine leads to weakening and damage to the parts that support the drum. Over time, you may be surprised by the washing machine drum falling.
4. The washing machine does not drain water.
One of the most common faults affecting fully automatic washing machines is a simple problem or a problem with the water drain pipes. The most important of these faults are:
- Blockage in the drain hose: The pump may be blocked by a piece of clothing such as socks, coins, tissues, etc.
- Drain cycle failure: This is usually accompanied by an error code. You can check the user manual or contact the manufacturer to find out the cause of the error code.
- Drain pump failure: If your washing machine makes a squeaking noise or starts leaking water, the reason is that the washing machine is overloaded.
- Overuse of detergent: Using too much detergent can cause excessive foaming that prevents the washing machine from draining properly.
At the end of the article, we provided information about the non-rotating drum of a fully automatic washing machine. You will find the reasons for the malfunction. You must inspect the washing machine to determine the root cause of the malfunction and whether it requires a maintenance technician or not. Follow the article and learn about the reasons for the non-rotating drum of the washing machine.
English 
Arabic 
French 
Spanish 
Portuguese