The best way to know what is wrong with your TV screen

Many people have started to face problems with their TV screens, including sudden malfunctions. This has made them want to know how to identify the malfunction in the TV screen, so that they do not have to resort to the maintenance centers responsible for this or even to the manufacturer. Therefore, you must know the method according to which you can identify the type of malfunction present in the screen, and we will discuss this below.

How to know what is wrong with the TV screen

There is no doubt that televisions are subject to many malfunctions throughout their use, which may be a malfunction with the screen itself or something similar. The method for identifying the malfunction in the television screen is as follows:

1. Change in screen colors

Some people may notice that the screen starts to change color, becoming blue or possibly black as well, and these colors are now replacing the colors that are supposed to be in the original.

2. The screen is not broadcasting anything.

If you turn on the screen and it doesn't display anything, this could be a problem that occurs in several places.

There may be a problem with the power supply, which is faulty, and the problem lies with the electrical wiring. Alternatively, the problem may lie inside or outside the TV. The solution here is to replace the damaged wiring and then turn the screen on again.

The problem is likely to be in a non-screen input, i.e. the radio input. This problem can be fixed using the remote control. This is done by clicking on Source or clicking on TV/Video and selecting the screen broadcast, until the screen works again.

3. The TV screen displays the same image.

One way to know if your TV screen is faulty is to find that the image stays in one place, whether this is permanent or it starts working again after a while.

If the problem with the TV is temporary, you can change the TV channel so that it broadcasts a different image and you will find that the screen is working again.

Or the problem may be permanent, and here you will find that if you change the channel you will face the same problem, and here the problem is internal burn-in of the screen, and here you must change it.

4. Cracks appear on the screen.

You find that the screen appears to be broken and there are prominent lines. The solution here is to replace it.

If the lines only appear during broadcast time, you should perform a short test by pressing the screen menu button. If the lines appear striped, you should have it replaced by the manufacturer.

If you notice that the lines disappear when you display the menu, all you have to do is restart the TV again.

5. The remote control is not working.

If you are experiencing a problem with the control panel not working, you should follow the following steps to find out where the problem is.

First, you need to make sure that the batteries are in the remote control. Use your phone's flashlight and place it on the remote control. You should notice the lights flashing and make sure they are working. In this case, the problem is with the TV itself. However, if the problem is with the remote control, it must be replaced.

There's also the possibility that you may need to replace the power outlet, which is one of the types of faults identified by the fault location. We've learned how to identify faults in your TV screen.

6. The image appears broken on the screen.

One way to identify a fault with your TV screen is for it to appear intermittent or pixelated. This is often due to a weak signal, and you can solve this problem by doing the following:

If you use satellite or even a cable to broadcast it, then the problem may be with the broadcast source itself.

7. Hearing an echo from the TV screen

If this happens, there is likely a sound separate from the TV speaker.

8. Picture and sound are out of sync.

One of the faults is that the picture and sound on the TV were not in sync, and here you can solve this problem by:

Open the audio settings, then adjust the audio to sync with the video. You can check if this issue is fixed by going to another video.

9. Inconsistent picture dimensions on the TV

You can adjust it by going to Settings and choosing Just-Fit, so that the image dimensions fit the screen size.

10. Horizontal lines appear on the screen during playback.

This is due to a problem with the cable box, and this fault is common in most modern monitors.

Why does the TV screen go black but the sound is on?

When you turn on the screen and find that the sound is working fine, but there is no picture, this is due to a problem with the internet connection, faulty cables, or incorrect installation.

What causes the screen to disconnect?

When a TV screen suddenly stops working, there is almost certainly a fault with the electrical current supplying the screen. Alternatively, the connection may be weak, in which case the power outlet should be replaced. Another cause could be a fault with the electrical cable.

How do I know if my TV screen is burnt in?

You can tell if the screen is burnt through several points, including:

1. There is dust between the layers of the TV, and over time it obstructs the passage of light waves.
2. A black screen will appear when you turn it on, and the screen sound is one of the signs that it has burned out.
3. You find that the image appears dimly lit.
4. If the screen is broken, it will burn out.
5. If you notice a black spot on the screen, this also indicates burn-in.

TV screen flickering problem

If you're experiencing a flickering screen, you can fix the problem by making sure all the wires are in their correct places and that none of them are faulty.

Solve the color problem of the Condor TV screen

You can solve the color problem on the screen by following these steps:

1. Press the Home button
2. Then click on the settings box.
3. Click on the display box
4. From the list in front of you, select the image, and adjust all the options related to the image.

TV screen hanger

1. Reset the TV using the remote control.
2. Or you can reset the screen by cutting off the power supply.

The TV screen is blue.

If the screen is blue, this can be caused by several reasons, including:

1. The correct input for the TV is not selected.
2. The antenna is not connected to the TV correctly.
3. The signal is likely weak.
4. Or the cables for the terrestrial channels are not connected to the TV
5. There is a problem with the connections between the TV and the device.

There are many faults that can occur, including any fault in the screen. To learn how to deal with them, you must know how to identify a fault in the TV screen, as we explained previously.